SUBTITLES:
Subtitles generated by robot
00:00
[Music]
optionally the ARCA stigma can offer
articulator calculations and the upper
jaw model transfer with the arbitrary
axis please buy down I place the lower
measuring bow on the para occlusal spoon
carry out the measurement and remove the
bow the indicator pin is inserted into
the left receptacle of the measuring
Bowl thereby pointing to the left
00:35
arbitrary hinge axis point the position
measurement is carried out and the
indicator pin is then repositioned to
the right side of the bowl thus the
right arbitrary hinge axis point is
shown and the measurement carried out
[Music]
subsequently the indicator pin is
inserted into the center position and
the measurement of the infraorbital
01:05
point is carried out thereby all
reference points have been measured
which displayed the reference plane for
the transfer of the view point the bite
fork suited to this arbitrary face book
has already been placed into position on
the patient and the clamp to fasten the
bite fall and face bow to each other is
01:37
affixed
the access pointers are now aligned and
fixed on both sides of the arbitrary
hinge axis points here by the position
of the arbitrary axis point in relation
to the upper dentition is fixed
thus the anatomically correct position
of the upper jaw model can be
transferred to the articulator the
patient opens her mouth slightly the
02:17
glabella support is removed and the face
boat is open the face bow can now be
removed from the patient's head shown
here is the installation of the model on
a proton articulator with the help of an
arbitrary face book as the retaining pad
would be disturbing when positioning the
02:48
face bow I have to remove it the side
fixing screw is opened and the pad can
be taken off
[Music]
the face bow can now be aligned with the
axis pointers to the articulated axis Oh
is closed by using the nerve screw and
placed on the incisal pin
[Music]
[Music]
03:33
the bite for support is raised and
stabilized as the face bowl by the model
installation the model is placed in the
impressions of the bite forth and the
mounting plate in the split cast of the
articulator of a part after closing the
articulator
we see here the slot for the mounting
plastered
[Music]
you
04:09
[Music]
Watch, read, educate! © 2021